RTW 28.10.2010 - slacks

the stretch on the L Route - all for me!

:)

 

Salaam.

 

It's the third RTW for me this week, and still in training mode in preparation for ECC Burung Hantu 2010. Albeit, not intense this morning. Just that I'm resting my RTW Machine for this week (and last week), out with full knobbies on Hollowpoint and hydrobag on my back.

 

While showering this morning, I decided to ride with office pants instead of padded shorts. I decided not to have another shower at the office, but only to shampoo my hair to get rid of the smell (from smoke, sweat) and the helmet hair. However, I donned a jersey with back pockets, for 2 purposes:

1. Upper body will be sweaty no matter how relaxed I'll be pedalling. Perhaps due to humidity, and especially so when I'm stopping at the traffic lights.

2. I need to flash out my workers pass/ID upon entering the gate. Putting it in my back pocket would be more secure, and faster for me to whip it out while rolling.

 

In order for me not to sweat as I would normally do, the pedalling is quite relaxed, and I chose to take the flattest route. It's a combination of my normal route, and the new L Route. Coincidentally, it's a bit shorter (by about 2 km) than the normal route. Instead of going to the Suria neighbourhood in Seri Alam, I went uphill to Tesco Seri Alam, continue towards Taman Rinting, another short uphill to Kampung Pasir Gudang Baru after the small bridge at the jetty, and take the L Route to the office.

 

The average speed with knobbies registered at 21.3 km/h, which is quite fast for a relaxed ride. It goes to show that the route is quite flat. There are only 2 small hills along the way, which I climbed with low gears and high cadence without much strain for the objective of the ride this morning is not to have my bottoms sweaty.

:)

 

I reached office 31 minutes after I left home. Took me only 5 minutes to shampoo, comb my hair and put on a collared t-shirt. My usual shower and change regime would normally take about 10 minutes.

 

Now, after doing RTW for a while, options are springing out. Good for me, for I'm the type of person who'd be bored with routines after a while. However, I reckon the L Route won't be there forever, as the alternative highway from Pasir Gudang to Bakar Batu will be opened some day. For now, I'll use it whenever I'm in L circumstances - lazy/late/lone mood.

 

Stats this morning:

Out from home	0706	hours
Arrive office	0737	hours
Door-to-door	31	mins
Ride time	28'45"
Distance	10.2	km
Ave. speed	21.3	km/h
Max speed	38.5	km/h
Odometer	5443.6	km
Good doggies	0
Mode	tesco + L route,	Hollowpoint, knobbies

 

Thanks for dropping by.

Explore new routes and modes, and get rid of getting bored.

10 Speed (or 20, or 30)

 

The normal gear count when I started mountain biking in 2007 was 27. That means 3 on the front and 9 on the rear. We refer to it as 9 speed, as saying 'twenty seven' is mouthful, and perhaps also it sounds too newbie.

:)

 

Of course there are also 8 speeds and 7 speeds still lurking around, particularly on cheap complete bike offerings. There are also 8 speeds on old skool riders' bikes, on the grounds of being content with it and don't see the need for additional weight plus expenses.

 

In 2009 SRAM introduced XX drivetrain, the revolutionary 10 speeds on the rear cog of an mtb, with the 10 speed CNC cassette, X Dome, which borrowed their road bike cassette technology. It came with a better shifting chainring design, closer ratio gears, and overall groupset (with brakes and fork) weight lower than Shimano's XTR (3x9). However, the XX system is having only 20 gear count, with 2 chainring in front.

 

Recently, Shimano also joins in the mtb 10 speed bandwagon with their lineup of Dynasys system, also with 2- and 3-chainring setups. Take that, 30 gears now for mtb! Not to be left out, SRAM also replied with their line up of new X7, X9 and X0 with a choice of also 20 or 30 gears. Do note that both are still offering the 'normal' 3x9 option.

 

Well, it seems that the terms that we use for indicating the gear count would definitely have to be changed now. A 10 speed may mean 20 gears or 30 gears. If road bike gearing tech is to be an indication of things to come, what's next? 11 speed? Electronic controlled shifting?

 

I haven't tried any of the 10 speed system, thus I can't say anything much about it except for the system itself. The big question for now: do we need them?

 

It goes down to personal choice. Efficiency, weight and durability need to be balanced. Not to mention the initial amount of $ to be forked out for a complete drivetrain.

 

Of course, there's also an issue of incompatibility with other systems. Can SRAM's 10 speed parts be used on Shimano's equivalent? With the 3x9 system, drivetrain parts are interchangeable between Shimano and SRAM, except for the rear shifter and RD which need to be specific due to cable pull ratio. Furthermore, with Shimano's Dynasys, the chain is specific for 10 speed, and even the side of the chain needs to be installed correctly. To me, that's robbing away flexibility and it goes without saying that you're stuck with whatever they want you to need for your drivetrain.

 

The interesting part of this is that SRAM is offering the 10 speed lineup as a complete groupset now; hub, crankset and brakes now packaged as SRAM's X0, X9 and X7 in addition to their existing shifters, derailleurs, cassette and chain respectively. That's another story altogether.

 

What we are presented with now are choices. Or are we shoved with choices...? There are many configurations available for any of the setups, be it 2x10, 3x10, either from SRAM or Shimano. For instance, the cassette choices for X9 has 9 configurations, but perhaps 7 of them are from their road range.

 

Shimano's Dynasis:

XTR				XT			SLX
crankset		cassette		crankset	cassette		crankset	cassette
3x10	2x10	11-36	11-34	3x10	11-36	11-34	3x10	11-36	11-34
24	38	11	11	24	11	11	24	11	11
32	26	13	13	32	13	13	32	13	13
42		15	15	42	15	15	42	15	15
		17	17		17	17		17	17
		19	19		19	19		19	19
		21	21		21	21		21	21
		24	23		24	23		24	23
		28	26		28	26		28	26
		32	30		32	30		32	30
		36	34		36	34		36	34

 

SRAM's lineup:

XX					X0
crankset			cassette		crankset			cassette
2x10			11-32	11-36	3x10	2x10		11-32	11-28	11-26	11-23	12-36
26	28	30	11	11	22	26	28	11	11	11	11	12
39	42	45			33	39	42
					44
			32	36				32	28	26	23	36

 

X9
crankset			cassette
3x10	2x10		11-23	11-25	11-26	11-28	12-25	12-26	12-27	11-32	12-36
22	26	28	11	11	11	11	12	12	12	11	12
33	39	42
44
			23	25	26	28	25	26	27	32	36

 

X7
crankset			cassette
3x10	2x10		11-23	11-26	11-28	11-32	12-36
22	26	28	11	11	11	11	12
33	39	42
44
			23	26	28	32	36

 

figures are from SRAM and Shimano websites

cassettes tooth count for SRAMs are unavailable

 

I'll stick for 3x9 for the time being, and waiting for the XX's X-glide chainring shifting tech to trickle down to their lower tier offerings.

:)

 

What's your drivetrain choice?

(Single speeders need not reply).

 

Thanks for coming over.

Have a good day!

 

p/s: now that they're moving into 10 speed, Shimano Alivio is now offered at 9 speed too.