akmal's bike park

akmal's bike park

Tuesday 22 March 2011

Review: NiteIze Marker Band

For my RTW, especially when riding wearing using long pants, the Marker Band is an indispensable item. It does a double job, safety wise: keeping the hem of the pants away from being stuck onto the chain/chainring whilst making me visible from rear.

NiteIze Marker Band on my right ankle
It's intended use is on the bicep; however, I use it on my right ankle while cycling.

It has a few options as a visibility marker:
Passive - reflective yellow band
Active - continuous red LED light
Active - blinking red LED light

The LED unit is the same as on the Sport Vest albeit shorter clear wand, with the same high quality for the make and material and with the same lighting modes - continuous, blinking and off. Battery is provided and I used the item straight away after taking it off from the packaging board.

NiteIze Marker Band

The unit is lighted by a small LED, and a clear wand is attached to it to disperse the light so that we get a long, lighted strip. Everything is encased in a reflective sleeve which is also fitted with loops to slip the elastic band in. The make is of high quality and feels durable too.

Visibility is good, and LED is bright eventhough it is encased in the reflective sleeve. The switch position is marked (printed) so that you won't have to wonder where it is. When using half finger gloves, I can feel the slight bump on the end of the LED unit - that's the switch. With full finger gloves, I have to look at the unit to turn on (or blink, or off) the LED.

Sporting an adjustable buckle on an elastic band, it is easy to strap on and to take off - the feature that I like most. As the strap is elastic, adjusting the buckle is easy - just fasten the buckle together, and pull the strap to your desired tightness. However, I'm afraid that over time it will give way. We'll have to see about that.

tuck the loose end in
Another thing to be careful with is that the elastic strap would have a long loose end dangling. I have about 3.5" loose end. This is foreseeable as the unit is intended to be used on the bicep. My biceps aren't big, either, and more so my ankle. I make sure that it won't get caught on the chainring by either tucking it under the marker, or just simply flip the buckle the other way around so that it would be on the outer side of the ankle. Having a proper way to secure the loose end (velcro, or provide a loop like a belt) would make it nicer.

At RM60 a piece, it is not cheap. But, you get what you pay for - high quality safety product. Other than the dangling elastic strap which is only a minor to me, there's practically no other negative side of the Marker Band that I've encountered so far. I'm quite happy with it.

Further reference:
NiteIze page on Marker Band

Marker Band is available locally through Gear 'n' Gadget.

2 comments:

LED Strips said...

Very good blog, very informative.

akmalhizam said...

LED Strips,
Thank you.